Tel:

180-8888-6977

新闻资讯

News Center

current position: Home > News Center > Technical News

How to solve the problem of low pressure in the washing machine?

2022-02-24 17:47:58
times

        The cleaning machine is usually used to wash and filter the pollutants generated or invaded by the hydraulic system during the manufacture, assembly, use process and protection; it can also be used for the regular protection and filtration of the working oil to improve the cleanliness and prevent or reduce the formation of pollution caused by pollution. faults, so as to ensure the high performance, high reliability and long life of hydraulic system equipment.

        If the washing machine is stopped after use, and the water is not boiled, the guns and pipes have water and are under pressure. As long as the gun is separated at this time, and the water in the gun and the tube is drained, there will be no pressure.


        First check whether the nozzle is worn; if it is worn, please replace the nozzle; if the filter is blocked, clean and replace the filter; remove the cleaning machine nozzle, engine, and observe whether the water sprayed by the spray gun is normal, if the water is normal, then install it Nozzle, observe whether there is pressure in the machine, if there is still no pressure, it means that the pressure regulating valve is damaged or the seal of the high pressure pump is damaged.


        Reasons and treatment methods for insufficient pressure of the cleaning machine: The high-pressure nozzle of the high-pressure cleaning machine is seriously worn, and the excessive wear of the high-pressure nozzle will affect the water outlet pressure of the equipment, and the new nozzle should be replaced in time. Insufficient water flow into the equipment leads to insufficient water flow and thus insufficient output pressure. The water supply should be supplied in time to meet the inflow flow, so as to deal with the problem of the pressure drop of the outflow. There is air in the clean water inlet filter of the high pressure washer, and the air in the clean water inlet filter should be exhausted to ensure that the standard water outlet pressure is output.


Recently Viewed:

contact

Mobile: 180-8888-6977 (Mr. Li)     Tel: 0755-23341037     QQ: 345976346

Add: Plant No. 224, Guangtian Road, Tangxiayong Community, Yanluo Street, Baoan District, Shenzhen

SCAN

SWEEP