Do you know some key points of cleaning machine inspection?

        No nozzles are dirty or clogged. If the orifice is blocked, the water flow and water pressure will be blocked, affecting the function of the washer. The water of the washing machine is recycled during the washing cycle, and the contaminants carried during the period may stay in the spray arm. Spray arms should be cleaned regularly.

        The outlet holes on the spray arms face the target surface. The spray arm of some cleaning machines loosens and rotates during use, resulting in the spray arm not facing the instrument. Many spray arms have holes on both sides; these holes can be adjusted up or down.

        Good Guns: Some machines are missing all guns, but the machines are still in use. If the spray arm is missing, the washing machine will not work properly, because the water pressure and water spray will greatly weaken the mechanical cleaning effect. If the spray arm is missing, do not use the gasket.

        Spray arm rotation to dredge: test the spray arm to rotate smoothly and evenly.

        Drain screen at the bottom of the washer is free of debris: The drain screen at the bottom of the washer will hold contaminants from the exterior group. The screen should be removed and cleaned at least once a day, or the number of cleanings should be increased according to the number of uses. A clogged screen can block water flow and drainage, which in turn affects the cleaning action of the washer.

        The instrument frame coupling is properly aligned with the manifold. Make sure the washing machine's water/detergent inlet is properly aligned with the wash rack manifold. If it is not aligned, it will affect the water flow, water distribution and water pressure, possibly causing the gasket to operate abnormally. Lack of water pressure can make the spray arm unable to work properly, weakening the mechanical cleaning effect.