Tel:

180-8888-6977

新闻资讯

News Center

current position: Home > News Center > Industry News

Washing machine no pressure troubleshooting

2022-02-24 17:52:34
times

        If the water is not boiled after use, the guns and pipes have water and pressure. Only at this time fire the gun and let the water out of the gun and the pipe, there is no pressure.

        1. First check whether the nozzle is worn; if it is worn, please replace the nozzle;


        2. Whether the filter is blocked, clean and replace the filter;


        3. Take off the nozzle of the cleaning machine and the engine, and observe whether the water sprayed by the spray gun is normal. If the water is normal, install the nozzle and observe whether the machine has pressure. If there is still no pressure, it means that the pressure regulating valve is damaged or the seal of the high-pressure pump is damaged. damage.


A high-pressure cleaner is a machine that generates high-pressure water from a high -pressure plunger pump         through a power device to wash the surface of an object. It can peel off the dirt, wash away, and achieve the purpose of cleaning the surface of the object. Because high-pressure water column is used to clean the dirt, high-pressure cleaning is also one of the most scientific, economical and environmentally friendly cleaning methods internationally.


        If the water is not boiled after use, the guns and pipes have water and pressure. Only at this time fire the gun and let the water out of the gun and the pipe, there is no pressure.


Recently Viewed:

contact

Mobile: 180-8888-6977 (Mr. Li)     Tel: 0755-23341037     QQ: 345976346

Add: Plant No. 224, Guangtian Road, Tangxiayong Community, Yanluo Street, Baoan District, Shenzhen

SCAN

SWEEP